Product Directory

<<Back  

| Home  | Customer Service Site Index  | FAQ  | Shipping  |

 |

 

 
     
        

   

   

Installs Under The Bed

The B & W's concept of "A hitch when you need it... A level bed when you don't" has been the basis for the Turnover Ball Gooseneck Hitch since 1988. The patented Turnover Ball offer you the versatility you need-when you need it. We off a Turnover Ball hitch to fill nearly every domestic full sized pickup on the market.

Rated at 30,000 lbs. Gross Trailer Weight and 
7,500 Tongue Weight Rating.
  

Converts in less the 30 seconds  
    

"No Frame Drilling" 


Safety Chain Brackets Included

  
The B & W Turnover Ball™ System converts from a towing unit to a level bed in less than 30 seconds.  To change, pull and turn the spring loaded latch pin from the driver's side wheel well, reach into the truck bed and lift the ball out of the receiver, turn it over, drop the ball back down the receiver, and engage the latch pin. The process takes longer to read than it does to complete.
Ease of Installation: Hitch bolts directly to the frame, under the bed using the existing holes already there with no frame drilling* or welding.

Hook your tape measure on the back edge of the truck bed (tail gate end).  Draw  a small line as directed on the installation sheet, divide the distance between the wheel wells and make another line, use a center punch to mark the intersection of the lines. Drill a 4" round hole at the intersection and the hard part is done.  The next step is to slide the cross members into position and bolt the center section between the cross members with the receiver tube inserted into the hole in the truck bed floor. Then bolt the side plates to the cross member and to the frame.  Finally tighten the setscrew on the release handle and drop the ball into the receiver. You're done!

  ACCESSORY

Turn The Turnover Hitch in to a  5th Wheel (Optional) 

For more information on this option  
 Click Here.

    
 

Click Here For Turnover Ball Accessories

Do Not Exceed Truck Manufacturer's Specifications

B & W Turnover Ball Gooseneck     
Chevy/Gmc     Ford      Dodge  Nissan  Toyota     All Other Trucks

To order: Find the correct hitch model for your truck(s) in the chart below.
Bolt-Together      

***Once you click "BUY NOW"  the shopping cart will apply a $49.00 shipping / handling fee to all B&W Turnover Balls. This is  for Regular ground  shipping in the continental USA. Expedited shipping IS NOT available at the shopping cart For B&W Turnover balls. If in addition to the   $ 325.00  B&W Turnover ball   you  purchase other items and select an expedited shipping service it will apply to those items ONLY.
*In some cases expedited shipping can be arranged. Please e-mail the part numbers, type of shipping desired and address. We will research costs and reply via e-mail.
   

Year

CHEVY/GMC

Part#

Price

 
73-87   Click Here to See Special Order
88-98

1/2,  3/4 and  1 Ton Long Bed Trucks

RNBW1000R $325.00
99-00

3/4 and  1 Ton Heavy Duty Long Bed Trucks (Classic body style)

RNBW1000R $325.00
88-98

1/2,  3/4 and 1 Ton Short Bed Trucks

RNBW1050R $325.00
99-00

3/4 and 1 Ton Short Bed Trucks (Classic body style)

RNBW1050R $325.00
07-08    1/2 Ton Trucks Short Bed Only with the New Boxed Frame RNBW1057R $325.00
07-08   1/2 Ton Trucks Long Bed Only (New boxed Frame) RNBW1007R $325.00
99-08

1/2 and 3/4 Ton Light Duty and 1500HD Short & Long Bed Trucks 
(Old body style) 

RNBW1059R $325.00
01-07

1 Ton 3500  Short & Long Bed Trucks CLASSIC ONLY (does not fit  NEW 2007- CURRENT BODY STYLE )

RNBW1062R $325.00
01-08    3/4 Ton Heavy Duty Long & Short Bed Trucks (fits 2007-Current New Body Style Also) RNBW1067R $325.00
07-08    1 Ton Trucks In 2007 Chev/ GMC installed some leftover 2006 beds and new 2007 beds. If  under the wheelwell your truck has 2 crossmembers approx 8" apart  then select BW1062R. If your cross members are approx 18 " apart you have the new bed and should choose B/W1067R RNBW1067R $325.00
   

****Fifth Wheel hitches are difficult to ship. We take steps to protect them but they may arrive with torn boxes and some scratches from shipping. This is not grounds for return.!!! For More Info see our Returns page.
   

***Once you click "BUY NOW"  the shopping cart will apply a $49.00 shipping / handling fee to all B&W Turnover Balls. This is  for Regular ground  shipping in the continental USA. Expedited shipping IS NOT available at the shopping cart For B&W Turnover balls. If in addition to the   $ 325.00  B&W Turnover ball   you  purchase other items and select an expedited shipping service it will apply to those items ONLY.
*In some cases expedited shipping can be arranged. Please e-mail the part numbers, type of shipping desired and address. We will research costs and reply via e-mail.
   

Year

FORD

Part#

Price

 

 Note:  How to determine if you have overload springs > Click Here

80-96

3/4 and  1 Ton Trucks (WITHOUT overload springs)

RNBW1100R $325.00
97-98

3/4 and  1 Ton Trucks (Old body style) (WITHOUT overload springs)

RNBW1100R $325.00
80-96

3/4 and  1 Ton Trucks (WITH overload springs)
(*Requires Drilling 2 holes}

RNBW1110R $325.00
97-98

3/4 and  1 Ton Trucks (Old body style) (WITH overload springs)
(*Requires Drilling 2 holes}

RNBW1110R $325.00
99-08   3/4 & 1 Ton Super Duty Long and Short Bed Trucks. Fits Gas and Diesel. RNBW1108R $325.00
2008   F-450 w/Factory Installed Bed RNBW1108R $325.00
80-96

1/2 Ton Truck with 5' 8" or  6' 5" SHORT BED and the New 4" Fully  Boxed Frame only! NOTE: Reduced cab clearance on 5' 8" bed. Purchase at your own risk. No return .Bed extender available at accessories page.

RNBW1150R $325.00
07-08

1/2 Ton LONGBED Truck with  5 1/2" Fully  Boxed Frame only! 

RNBW1057R $325.00
04-08  1/2 ton F-150  short /long bed (new body style )will not fit 04' Heritage edition. Also fits Supercrew. NOTE: Reduced cab clearance on Supercrew. Purchase at your own risk. No return .Bed extender available at accessories page. RNBW1104R $325.00
97-00    3/4 Ton Trucks with Factory Air bags Overload -- New Body Style Click Here to See Special Order

   
***Once you click "BUY NOW"  the shopping cart will apply a $49.00 shipping / handling fee to all B&W Turnover Balls. This is  for Regular ground  shipping in the continental USA. Expedited shipping IS NOT available at the shopping cart For B&W Turnover balls. If in addition to the   $ 325.00  B&W Turnover ball   you  purchase other items and select an expedited shipping service it will apply to those items ONLY.
*In some cases expedited shipping can be arranged. Please e-mail the part numbers, type of shipping desired and address. We will research costs and reply via e-mail.

****Fifth Wheel hitches are difficult to ship. We take steps to protect them but they may arrive with torn boxes and some scratches from shipping. This is not grounds for return.!!! For More Info see our Returns page.
  

Year

DODGE

Part#

Price

 
73-97   Click Here to See Special Order

94-01

1/2 Ton Trucks

RNBW1394R $325.00

94-02

3/4 and  1 Ton Trucks

RNBW1394R $325.00

02-08

1/2 Ton Trucks Long & Short Beds (No Mega Cab)

RNBW1316R $325.00
03-08  3/4 and 1 Ton Trucks Long & Short Beds   RNBW1306R $325.00
2006-current  MEGA CAB Truck  1/2....3/4....1 Ton Mega Cab Short Bed RNBW1306R $325.00

****Fifth Wheel hitches are difficult to ship. We take steps to protect them but they may arrive with torn boxes and some scratches from shipping. This is not grounds for return.!!! For More Info see our Returns page.
  

***Once you click "BUY NOW"  the shopping cart will apply a $49.00 shipping / handling fee to all B&W Turnover Balls. This is  for Regular ground  shipping in the continental USA. Expedited shipping IS NOT available at the shopping cart For B&W Turnover balls. If in addition to the   $ 325.00  B&W Turnover ball   you  purchase other items and select an expedited shipping service it will apply to those items ONLY.
*In some cases expedited shipping can be arranged. Please e-mail the part numbers, type of shipping desired and address. We will research costs and reply via e-mail.
  

Year

NISSAN

Part#

Price

 
04-07 Nissan Titan Pickup Fits Long Bed  and  67" Short Bed
(ball center on short and Long Bed is 46.5" from rear of of bed) May necessitate use of extender...see turnoverball accessories

RNBW1204R

$325.00
2008 Nissan Titan Pickup 5' 6" and 6' 6"  Bed

RNBW1204R

$325.00
2008 "NEW" Nissan Titan Pickup 7'3" and 8' Long beds

RNBW1208R

$335.00

****Fifth Wheel hitches are difficult to ship. We take steps to protect them but they may arrive with torn boxes and some scratches from shipping. This is not grounds for return.!!! For More Info see our Returns page.
  

***Once you click "BUY NOW"  the shopping cart will apply a $49.00 shipping / handling fee to all B&W Turnover Balls. This is  for Regular ground  shipping in the continental USA. Expedited shipping IS NOT available at the shopping cart For B&W Turnover balls.If in addition to the   $ 325.00  B&W Turnover ball   you  purchase other items and select an expedited shipping service it will apply to those items ONLY.
*In some cases expedited shipping can be arranged. Please e-mail the part numbers, type of shipping desired and address. We will research costs and reply via e-mail.
  

Year

TOYOTA

Part#

Price

 

01-06

Tundra

RNBW1251R $325.00

07-09

Tundra Pickup MUST read prior to purchase Click Here
     
NOTE: The ball cannot be stored in the receiver of this hitch.
B&W accessories, including the Companion, will NOT work with this model due to Toyota frame changes.

RNBW1257R $335.00
07-09   For use on 07-Current Tundra Pickup ONLY 4" Hitch Extender

GNXA4585

$129.00

   

****Fifth Wheel hitches are difficult to ship. We take steps to protect them but they may arrive with torn boxes and some scratches from shipping. This is not grounds for return.!!! For More Info see our Returns page.
  

How do I determine if my Ford truck has overload springs?
If the truck has overloads, there will be an extra mounting bracket in front of the regular mounting bracket. The truck will have the regular springs, then a spacer, then another spring or set of springs ( the overload springs) above the regular springs. 

 *One hole in each frame rail is required on some trucks


Hitches Below Are Special Order 1 Piece   Allow 3 to 4 Weeks for Delivery
***Once you click "BUY NOW"  the shopping cart will apply a $49.00 shipping / handling fee to all B&W Turnover Balls. This is  for Regular ground  shipping in the continental USA. Expedited shipping IS NOT available at the shopping cart For B&W Turnover balls. If in addition to the B&W Turnover ball you  purchase other items and select an expedited shipping service it will apply to those items ONLY.
*In some cases expedited shipping can be arranged. Please e-mail the part numbers, type of shipping desired and address. We will research costs and reply via e-mail.
   

Year

DODGE

Part#

Price

 

73-93

1/2, 3/4 & 1 Ton (Requires drilling)

RNBW1300SP $348.00

Year

CHEVROLET & GMC

Part#

Price

 

73-87

1/2, 3/4, & 1 Ton (Requires drilling)

RNBW1400SP $348.00

Year

ALL OTHER TRUCKS

Part#

Price

 

 

1/2, 3/4, & 1 Ton (Requires Drilling & Trimming)

RNBW1200SP $348.00

****Fifth Wheel hitches are difficult to ship. We take steps to protect them but they may arrive with torn boxes and some scratches from shipping. This is not grounds for return.!!! For More Info see our Returns page.
  

  

© 2001 HitchesOnline.com    All Rights Reserved.

  
Site By

logo4black.gif (3688 bytes)