|
Most trailers operate on a two wire system when the
brake lights and turn signals operate on the same wire.
When the towing vehicle has separate wires for brake
lights and turn signals, a taillight converter is
required.
|
|
HOW
TO DETERMINE THE RIGHT MODULITE FOR YOU.
The converter you choose depends on the type of
trailer you'll be towing and the car or truck
you'll be towing it with (the electrical systems
on some vehicles are designed to handle the power
needs of the vehicle only). Be sure to consult
your owner's manual for their recommendations.
- 2 wire systems have stop
and turn on the same circuit
- 3 wire systems have brake
& turn lights on separate circuits.
|
|
Bulb Type
|
Candle
Power |
Rated
Amps |
Watts |
|
#57/#1895
|
2
|
0.27
|
3.780 |
|
#2057
|
32
|
2.10
|
26.880 |
|
|
2
|
0.48
|
6.720 |
|
MR16
|
-
|
-
|
35 |
|
#921
|
21
|
1.40
|
17.920 |
|
#922
|
15
|
0.98
|
12.544 |
|
#1141
|
21
|
1.44
|
18.432 |
|
#93
|
15
|
1.04
|
13.312 |
|
#105
|
12
|
1.07
|
13.696 |
|
#1156
|
32
|
2.10
|
26.880 |
|
#1157
|
32
|
2.10
|
26.880 |
|
|
3
|
0.59
|
8.260 |
|
#168
|
3
|
0.35
|
4.900 |
|
#194
|
2
|
0.27
|
3.780 |
|
|
|
|
Trailer
Light Power Modules
|
|
HH119176
|
Features:
The ModuLite® with short circuit protector, adds
integrated short circuit protection that
safeguards itself and the tow vehicle against
harmful electrical shorts and mis-wire situations.
- Draws power
directly from the vehicle battery and uses
less than 5 mA of the vehicle circuit for
sensing to turn the trailer functions on and
off
- Will work with
most LED/Incandescent/Standard bulbs (vehicle
& trailer)
- The unit is
rated for up to 2.1 amps for Turns/Stops
circuits and 5.6 amps for the Taillight
circuit
- Will work with
most vehicles that have a multiplex system for
lighting
- The taillight
circuit has been upgraded to work with
vehicles that use a pulse width modulation (PWM),
this will allow the convertor to turn on fully
and gives the trailer lights full brightness
during activation
- This unit
prevents feedback from trailer to the vehicle
system
- Can be used on a
2-wire or 3-wire system
- Includes
integrated protective cover
| Part
# |
Description |
Price |
|
| HH119176 |
2.1
(turn) Taillight Converter, Converter Specification of 5
(tail) 2.1 amps per stop/turn & 5 amps per tail
circuit. Short circuit protected unit. Includes 18" blunt
leads and 4-Way Flat with 60" lead.
|
$49.95 |
 |
| DON'T
FORGET INSTALLATION KIT BELOW |
|
|
|
HH118151 |
| Part
# |
Description |
Price |
|
| HH118151* |
Wiring
Kit for installing all Modulites
|
$9.95 |
|
|
|
|
|
HH119186
|
| Part
# |
Description |
Price |
|
| HH119186 |
Hidden
Hitch Universal Electrical Four Flat Powered Taillight converter
WITH INSTALLATION KIT (Must be Hardwired...approx 1 Hr Install
time)
|
$47.95 |
|
|
|
|
|
HH119146
|
Features:
- Draws power
directly from the vehicle battery and uses
less than 5 mA of the vehicle circuit for
sensing to turn the trailer functions on and
off
- Will work with
either LED/Incandescent bulbs (vehicle &
trailer)
- The taillight
circuit has been upgraded to work with
vehicles that use a pulse width modulation (PWM),
this will allow the convertor to turn on fully
and gives the trailer lights full brightness
during activation
- The trailer
brakes will override the hazard lamps when the
brake is activated
- The unit is
rated for up to 2.1 amps for Turns/Stops
circuits and 7.5 amps for the Taillight
circuit
- Will work with
most vehicles that have a multiplex system for
lighting
- Can be used on a
2-wire or 3-wire system
- Includes
integrated protective cover
| Part
# |
Description |
Price |
|
| HH119146 |
Hidden
Hitch Universal Electrical 119146 4 Flat Powered Taillight
converter
(must be Hardwired)
|
$39.95 |
|
| DON'T
FORGET INSTALLATION KIT BELOW |
|
|
|
|
HH119190
 Installation
Instructions
|
Features:
- Converts
vehicle functions from a 3 wire system
to a trailer 2 wire system
- Draws
Power directly from the Vehicle Battery
and only uses less then 5 milliamps of
the vehicle circuit for sensing (Standby
Current < 2mA) to turn the trailer
functions on and off
- Heavy-Duty!
Rated for up to 4.2 amps for Turns/Stop
circuits and 7.5 amps for the Taillight
circuit
- Has
integrated re-settable Short Circuit and
Overload protection, to safeguard itself
and the tow vehicle from shorts and
installation wiring mishaps
- All-solid
state components in potted encapsulation
- Works with
either LED or Incandescent bulbs
(input/output) this gives trailer lights
full brightness
- Designed
not to send feedback thru the vehicle
circuits
- Interprets/decodes
multiplex signal inputs (BMW &
Mercedes applications)
|
Hard
To Wire Vehicles
| Years |
Make |
Model |
|
| 04-08 |
BMW |
X3 |
|
| 00-06 |
BMW |
X5 |
|
| 07-08 |
Mercedes |
R320
CDI |
|
| 07-08 |
Mercedes |
R320
CDI |
w/Panoramic
Roof Pkg. |
| 06-08 |
Mercedes |
R350 |
|
| 06-08 |
Mercedes |
R350 |
w/Panoramic
Roof Pkg. |
| 06-07 |
Mercedes |
R500 |
w/Panoramic
Roof Pkg. |
| 06-07 |
Mercedes |
R500 |
|
| 07-08 |
Volkswagen |
GTI |
2
Dr. Hatchback |
| 06-08 |
Volkswagen |
Passat |
All,
Except 4 Motion |
| 07-08 |
Volkswagen |
Passat
Wagon |
All,
Except 4 Motion |
|
| Part
# |
Description |
Price |
|
| HH119190 |
ModuLite®
HD Protector w/Integrated Circuit & Overload Protection
Trailer Light Power Module |
$49.95 |
|
| DON'T
FORGET INSTALLATION KIT BELOW |
|
|
|
|
HH118151 |
| Part
# |
Description |
Price |
|
| HH118151* |
Wiring
Kit for installing all Modulites
|
$9.95 |
|
|
|
|
HH118155
|
| Part
# |
Description |
Price |
|
| HH118455 |
T-One
Connector Assembly w/Upgraded Circuit Protected ModuLite®
Module
Fits Dodge Nitro's
|
$54.95 |
|
|
|
|
|
TAIL
LIGHT CONVERTER Kit (Non-Powered)
|
|
(Designed for
vehicles w/separate turn and stop lights and no
factory (O.E.M.) wiring harness)
|
- Installs in
minutes on vehicles without Pre-Wire
Connectors
- Test light
included on 20251
- 16 Guage wire
with 4-Way Flat Dust Cover
| Part
# |
Description |
Price |
|
| HH20251 |
2.1
(turn) Taillight Converter, Converter Specification of 5
(tail) 2.1 amps per stop/turn & 5 amps per tail
circuit. Short circuit protected unit. Includes 18" blunt
leads and 4-Way Flat with 60" lead.
|
$29.95 |
|
|
|
|
|
TAIL
LIGHT CONVERTER (Non-Powered)
|
|
HH119130
|
Features:
Adds integrated short circuit protection that
safeguards itself and the tow vehicle against
harmful electrical shorts and mis-wire situations.
- Adapts import
and domestic vehicles with separate turn and
stop lights (3-wire system) to standard
trailer taillight wiring (2-wire system)
- The unit is
rated for up to 2.1 amps for Turns/Stops
circuits and 7.5 amps for the Taillight
circuit
- Includes
integrated protective cover
- Will work with
most vehicles that have a multiplex system for
lighting
- Works with LED
Taillights
| Part
# |
Description |
Price |
|
| HH119130* |
Taillight
Converter with Integrated Circuit Protection
|
$24.95 |
|
|
|
|
|
4-Way
Flat - Car End - 4 Wire System
|
| Part
# |
Description |
Price |
|
 |
HH118002 |
60"
Car End Plug - Includes 4 Wire Taps, Display Pkg.
|
$9.95 |
|
|
|
|
